Server Environment Monitoring System IP SNMP. Remote power rebooter, data center thermometer, monitor computer room.

Environment Monitoring

Environment Monitoring
Environmental monitoring systems prevent hardware damage to server rooms, data centers and network closets with critical condition alerts and remote reboot capability.

Environmental threats in your server room can cause a lot more damage than hardware or software problems. Redundant hardware, backup tapes, UPS battery arrays, generators and other fault-tolerance measures can all be rendered useless if your server room overheats or floods. Don’t ignore environmental threats – remotely manage them with an ENVIROMUX® Server Environment Monitoring System or Intelligent Power Distribution Control Unit via TCP/IP Ethernet protocol over CAT5 through an RJ45 connector.

Monitor Temperature The most common environmental threat in any server room or wiring closet is heat. Detect critical rises or drops in temperature, and receive notifications when heating problems occur.

Monitor Humidity Detect abnormal humidity conditions. You define the humidity levels that are appropriate for each sensor's environment.

Detect the Presence of Water Whether it's a tripped sprinkler system or a flash flood, a server room or wiring closet is just about the last place you want to see water. Receive notification as soon as water makes an appearance.

Monitor Physical Security Monitor "dry-contact" devices including motion sensors, door sensors, vibration sensors and smoke detectors.

Control Power Remotely reboot and control power (on/off) to servers and network devices.

Also known as: remote SNMP environment monitoring system, monitor server rooms, data center monitoring, computer room, network closet, temperature sensor, remote power reboot, web alert thermometers, server room monitoring.
Enterprise Environment Monitoring Systems
  • Small Enterprise Environment Monitoring System

    E-2D

    The E-2D supports 2 external configurable sensors, 5 digital inputs, and 1 output relay for control of an external device. It features 2 USB ports for USB modem or USB flash drive. Linux inside.

  • Medium Enterprise Environment Monitoring System

    E-5D

    The E-5D supports 5 external configurable sensors, 5 digital inputs, 2 output relays for control of external devices. The system also includes two internal sensors: temperature and humidity. It features 4 USB ports for USB modems or USB flash drives. Linux inside.

  • Self-Hosted Enterprise Environment Monitoring System Management Software

    E-MNG-SH Self-Hosted Enterprise Environment Monitoring System Management Software

    Optional Management Software for E-2D/5D/16D. E-MNG-SH is a self-hosted software program that provides an easy-to-use, unified interface for monitoring and configuring up to 3,000 E-2D/5D/16D units and all connected sensors (internal, external, and digital input) and output relays via Ethernet. The software is installed on a Windows-based server or computer to actively poll all units for status information and alerts. Any computer, smartphone, or tablet with a web browser can be used to access the software. It allows users to be kept up to date on sensor statuses and be alerted instantly when a sensor goes out of range of a configurable threshold.

  • Enterprise Server Environment Monitoring System Management Software

    E-MNG: Monitor multiple sensors and IP cameras.

    E-MNG is an intuitive graphical management software that provides an easy-to-use, unified interface for both monitoring and configuring up to 3,000 E-2D/5D/16D, E-MICRO-T(RHP), E-1W(P), E-SEMS-16(U), IPDU-S4/8 units and all connected sensors.

Low-Cost Environment Monitoring Systems
  • Low-Cost Environment Monitoring System – Supports up to 24 Temperature Sensors

    E-1W

    The ENVIROMUX® Environment Monitoring System (EMS) with 1-Wire Sensor Interface monitors critical environmental conditions, such as temperature, humidity, liquid water presence, power, intrusion, and smoke. When a sensor goes out of range of a configurable threshold, the system will notify you via email, web page, network management (SNMP), and/or SMS messages (via email-to-SMS). The IoT system supports 24 single reading 1-wire sensors in any combination – temperature, humidity, dew point, thermocouple or digital inputs – and 2 separate digital inputs. It functions independently or as an IP-connected remote sensor for the E-2D/5D/16D.

  • Micro Environment Monitoring System / Remote Temperature/Humidity Sensor over IP

    E-MICRO-TRH - Micro Environment Monitoring System

    The ENVIROMUX® Micro Environment Monitoring System (EMS) monitors critical environmental conditions, such as temperature, humidity, liquid water presence, power, intrusion, and smoke. When a sensor goes out of range of a configurable threshold, the system will notify you via email, web page, network management (SNMP), and/or SMS messages (via email-to-SMS). The system functions independently or as an IP-connected remote sensor for the E-2D/5D/16D. It features an integrated temperature/humidity sensor, two RJ45 sensor ports for external temperature/humidity sensors, two dry contact inputs and optional built-in Power over Ethernet (PoE).

Mini Environment Monitoring Systems
Low-Cost Liquid Detection Monitoring System
  • Single-Zone Liquid Detection System

    E-LDA-LC2

    The ENVIROMUX® Single-Zone Liquid Detection System monitors up to 1,640 feet (500 meters) of liquid/chemical detection sensor cable or an under carpet leak detection sensor. When the sensor detects a water or chemical leak, the system will notify you via a visual indicator (red LED) and an audible alarm.

Power Monitoring and Power Control Devices
  • AC Voltage Detector with Relay

    E-ACVDRLY-515

    The ENVIROMUX® AC Voltage Detector with Relay detects voltage from 50VAC to 250VAC when connected to an environmental monitoring system with dry contact inputs, battery, sensor, or other device. The internal relay closes when sensing voltage above 60VAC and opens when sensing voltage 55VAC and below.

  • Secure Remote Power Control Unit with Environmental Monitoring

    IPDU-S2 (Front & Back)

    The ENVIROMUX® Secure Remote Power Control Unit allows you to remotely reboot and control power (on/off) to two servers or other powered devices from any location via secure web interface, RS232, SSH, or Telnet.