Environment Monitoring System Tamper Switch & Emergency/Panic Button

Motion/Intrusion/Vibration Sensors compatible with ENVIROMUX-2D, ENVIROMUX-5D and ENVIROMUX-16D

ENVIROMUX-TDS

Tamper switch for drawers and alarm boxes.
Sends activation signal when tamper switch is released.
Silver-plated contacts ensure reliable long-term operation.
High-impact white plastic case, screw terminals.
Screw terminal
- Connect to digital input or RJ45 sensor port on an ENVIROMUX system.
  - To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
  - To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
Maximum cable length: 1,000 ft (305 m).
Normally-open contacts at rest, closed contacts when depressed.
Operating temperature: -13 to 158°F (-25 to 70°C ).
Dimensions (WxDxH): 2.74x1.12x0.63 in (70x28x16 mm),

ENVIROMUX-EBS

Sends activation signal when button is pressed.
For normally closed or normally open circuit connections.
Screw terminal.
- Connect to digital input or RJ45 sensor port on an ENVIROMUX system.
  - To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
  - To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
Maximum cable length: 1,000 ft (305 m)
Dimensions WxDxH: 0.9x0.6x3 in (23x14x76 mm)
Regulatory approvals: RoHS