Environment Monitoring System IP Temp CAT5 Video Extender HDMI VGA DVI KVM Switch, Video Splitter, Video Matrix Switch
E-LLS-PF
E-LLS-PF

Plastic Vertical Liquid Level Float Switch

NTI Part #: E-LLS-PF
Liquid, Water & Chemical Level Float Sensors compatible with ENVIROMUX® E-2D, E-5D and E-16D
  • Vertically mounted float switch – install in the top or bottom of the tank.
  • Magnets within the float actuate a highly reliable and repeatable hermetically sealed reed switch as the float rises and lowers with liquid level.
  • Single-pole single-throw (SPST) circuitry.
    • Configure for normally open or normally closed circuit connection.
      • When installed on top of the tank and used for sensing when liquid rises to a certain level, the sensor will be "normally closed" and will open when the liquid reaches that level.
      • When installed on the bottom of the tank with liquid already there and used for sensing the drop in the liquid level beyond a certain point, the sensor will be "normally open" and will close when the liquid drops to that level.
  • IP68-rated water and dust protection.
  • Max pressure: 72.5 psi (0.5 MPa)
  • Float specific gravity: 0.7
  • Material:
    • Float: PVDT
    • Stem: PP
  • Cable length: 15.75 in (40 cm)
    • Wire gauge: 24 AWG
    • Includes two butt splice connectors for extending the cable length up to 1,000 feet.
  • Connect to digital input or RJ45 sensor port on an E-2D/5D/16D.
    • To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor cables using the included butt splice connectors.
  • Float Diameter: 0.75 in (19 mm)
  • Stem length: 2 in (51 mm)
  • Operating temperature: -4 to 176°F (-20 to 80°C).
  • Electrical rating: AC 220V/1A; DC 24V/0.5A
  • Mounting thread: M8x1.25