Wire & Wireless, Singapore Distributor for Network Technologies Inc

Server Environment Monitoring System Sensors

Temperature humidity, door contact, liquid detection

 Return home

Server Environment Monitoring System Sensors

Sensors compatible with ENVIROMUX-MINI

Temperature/Humidity Combination Sensor

Temperature Sensor
ENVIROMUX-TRH-xx
ENVIROMUX-TRH-xx		 ENVIROMUX-T-xx
ENVIROMUX-T-xx
  • For use with ENVIROMUX-MINI.
  • Applications from 0ºC and 40ºC (32°F to 104°F) and 20% to 80% relative humidity.
  • High resistance to external influences on the cable due to digital output signal.
  • Accurate to within ±0.75ºC (±1.35°F) and ±5% relative humidity.
  • Re-calibration is not necessary after initial set-up.
  • Available lengths: 0.9/1.8/3/7.6 meters.
  • Includes mounting hardware.
  • RoHS Compliant Temperature/Humidity Combination Sensor
 RoHS compliant.
  • For use with ENVIROMUX-MINI.
  • Applications from 0ºC to 40ºC (32°F to 104°F).
  • High resistance to external influences on the cable due to digital output signal.
  • Accurate to within ±0.75ºC (±1.35°F).
  • Re-calibration is not necessary after initial set-up.
  • Available lengths: 0.9/1.8/3/7.6 meters.
  • Includes mounting hardware.
  • RoHS Compliant Temperature Sensor RoHS compliant.

Liquid Detection Sensor

Door Contact Sensor
ENVIROMUX-LDx-y
ENVIROMUX-LDx-y		 ENVIROMUX-M-DCS
ENVIROMUX-M-DCS
  • For warning of flooding.
  • 100% waterproof electronics.
  • Detects any conductive liquid.
  • Puddle: 1.53 cm diameter.
  • Detects liquid depth >0.25 cm.
  • Supports water sensor cable lengths from 0.3 to 305 meters.
  • Supports 2-wire cable lengths from 1.52 to 30.5 meters.
  • Regulatory approvals: CE, FCC, RoHS
  • RoHS Compliant Liquid Detection Sensor
 RoHS compliant.
  • Monitors access with a magnetic bridge sensor, which responds to any magnetic material (no special inserts necessary).
  • Can also be used for monitoring side wall and covers.
  • Includes mounting hardware.
  • For normally closed circuit connection.
  • 2-wire interface.
  • Screw terminal.
  • Wide actuating gap, approximately 25mm.
  • Dimensions WxDxH (mm): 13x13x51 (Switch), 13x13x51 (Magnet).
  • RoHS Compliant Door Contact Sensor
 RoHS compliant.

Humidity Sensor

Smoke Detector

ENVIROMUX-RH-xx
ENVIROMUX-RH-xx		 ENVIROMUX-TDS
ENVIROMUX-SDS-PA
  • For use with ENVIROMUX-MINI.
  • Applications from 20% to 80% relative humidity at temperatures between 0ºC and 40ºC.
  • High resistance to external influences on the cable due to digital output signal.
  • Accurate to within ±5% relative humidity.
  • Re-calibration is not necessary after initial set-up.
  • Available lengths: 0.9/1.8/3/7.6 meters.
  • Includes mounting hardware.
  • RoHS Compliant Humidity Sensor
 RoHS compliant.
  • For warning of smoke.
  • Includes mounting hardware.
  • Photoelectric smoke detector.
  • Screw terminal.
  • Includes 9V/1A power supply.

Emergency/Panic Button

Temperature Sensor, Extended Range
ENVIROMUX-EBS
ENVIROMUX-EBS		 ENVIROMUX-IND-xx
ENVIROMUX-T-IND-xx
  • Sends activation signal when button is pressed.
  • For normally closed or normally open circuit connections.
  • 2-wire interface.
  • Screw terminal.
  • Dimensions WxDxH (mm): 10x23x76
  • RoHS Compliant Emergency/Panic Button
 RoHS compliant.
  • For use with ENVIROMUX-MINI-IND.
  • Applications from 0ºC and 75ºC (32°F to 167°F).
  • High resistance to external influences on the cable due to digital output signal.
  • Accurate to within ±1.25ºC (±2.25°F).
  • Re-calibration is not necessary after initial set-up.
  • Available lengths: 0.9/1.8/3/7.6 meters.
  • Includes mounting hardware.
  • RoHS Compliant Temperature Sensor, Extended Range
 RoHS compliant.

Tamper Switch

Air Flow Monitor
ENVIROMUX-TDS
ENVIROMUX-TDS		ENVIROMUX-AFM - Air Flow Monitor
ENVIROMUX-AFM
  • Sends activation signal when tamper switch is released.
  • Normally closed contact when depressed.
  • Dimensions (mm): inner diameter: 20, outer diameter: 23, height: 74
  • 2-wire interface.
  • Reliable mechanical solution for monitoring
    air flow.
  • Reacts to any condition causing insufficient flow of air such as malfunctioning cooling fan, increased friction, or physical blockage.
  • Can be used for direct monitoring of a cooling fan.
  • Dimensions WxDxH (mm): 34x17.5x7.5
  • Switch contact is closed when air flow is >2.5 m/s.
  • Connection: 2x single strand AWG26, length 0.5 m.
  • Regulatory approvals: RoHS

Sensor Cables

Power Converter
ENVIROMUX-2W-xx
ENVIROMUX-2W-xx		PWR-48V-5V1A
PWR-48V-5V1A
  • 2-wire sensor cable.
  • Use to connect dry contact sensors to the ENVIROMUX-MINI.
  • Available lengths: .9/1.8/3/7.6/15.2/30.5 meters
  • RoHS Compliant Sensor Cables
 RoHS compliant.
  • Use the PWR-48V-5V1A power converter to install the ENVIROMUX-MINI in a Telecom environment.
  • Accepts 36~72VDC (48 VDC nominal).
  • Accepts positive or negative polarity.
  • Outputs +5VDC and can handle 1A load.
  • 3-pole detachable screw terminal for connecting 48V input.
  • 2.1x5.5mm male DC power jack.
  • Dimensions WxDxH (mm): 46x53x25
  • RoHS Compliant Power Converter
 RoHS compliant.

AC Voltage Detector
ENVIROMUX-2W-xx
ENVIROMUX-ACVD-515M
ENVIROMUX-ACVD-515
ENVIROMUX-ACVD-C14M
ENVIROMUX-ACVD-C14

RoHS Compliant Power Converter
  • Measurement range: detects voltage from 50 to 250 VAC.
  • Measurement indication: Alarm or Normal.
  • Sensor type: open/closed contact switch.
  • Attached 0.9 meter power cord.
    • ENVIROMUX-ACVD-515M: Standard US 120V 15A NEMA 5-15 plug (When using with ENVIROMUX-MINI that was purchased before 11/1/2007, use part number ENVIROMUX-ACVD-515)
    • ENVIROMUX-ACVD-C14M: Universal 250V IEC C14 socket (When using with ENVIROMUX-MINI that was purchased before 11/1/2007, use part number ENVIROMUX-ACVD-C14)
  • Regulatory approvals: CE, RoHS.